I am trying to scan on my printer/scanner CANON MP230, but everytime this error code 2,140,21 ('printer is being used or an error has occurred') is showing up, the black ink is all out, does that has to do anything with the problem? It doesn´t seem logical that it needs ink to SCAN. I already tried. I am trying to scan on my printer/scanner CANON MP230, but everytime this error code 2,140,21 ('printer is being used or an error has occurred') is showing up, the black ink is all out, does that has to do anything with the problem? Sheila Majid Rapidshare.

What is Error Code B200? I have a MP560 Canon printer. Working suddenly and is showing B200 in the window and it says printer error has occurred. Overachievement John Eliot Ebook on this page.

It doesn´t seem logical that it needs ink to SCAN. I already tried turning off and on the printer, I checked also for pending print-outs and there´s none, I ran the problem diagnosis software and nothing.please help. You will try under the step...... Remove all paper from the machine and then blow out the feed roller and paper tray thoroughly with compressed air three or four times. Once done plug in back in and insert a single sheet of paper. Turn the machine on and then connect the usb cable. Then please test the machine and see if the problem is still there.

If it is next remove all the paper from the machine. Then with a flashlight look very closely at both the paper feed roller, as well as inside the machine around the ink cartridges. Something as small as a pin stuck in either area could cause this problem. Dj Kicks Thievery Corporation Rare there. Remove all the ink cartridges from the machine Then clean the contacts on the cartridges as well as inside the machine itself Do this with a small amount of warm water on a cotton swab until no ink comes off on the swab If any of the other cartridges are low, empty, leaking or bulging replace them Then turn off the machine and unplug it for 70 seconds Plug it back it and wait for the insert cartridges message Insert the cartridges and check to see if the problem is still there. Unfortunately if the problem is still there after this it means the feed roller has failed and needs to be replaced. Replacing this part however can sometimes cost more than replacing the machine itself so I would call around for a price first.